F25-8S
F25-8S TR (1Tx+1Rx)
Four-Motion Single-Speed System
One Transmitter + One Receiver
F25-8S 2TR (2Tx+1Rx)
Four-Motion Single-Speed System
Two Transmitters + One Receiver
F25-8S General Specification
RF Unit: | Microprocessor-controlled PLL synthesizer (160 Channels/Frequencies) |
Channel Spacing: | 80 KHz |
RF Power: | FCC Part 15 (50mV/meter field strength) / <10 mWatt |
RF Approval: | License-free in North America |
Modulation: | FSK |
Installation: | Pre-wiring cable for quick and easy installation |
Housing: | Durable casing with extra shock resistance (IP65) |
Temperature Range: | -49°F to 185°F (-40°C to +85°C) |
Operation Range: | Up to 110 yards (100 meters) |
FCC: | LWN1211F52 |
Ingress Protection: | IP65 |
Application:
F25-8S Tx (Transmitter)
| Power Supply: | 4 AA-Sized Batteries 4×1.5 Volts |
| Commands: | EMS Knob + Safety On/Off Key + 8 Single-Step Command Buttons + Start and Alarm/Horn Buttons |
| Power Indicator: | 3-Stage LED |
| Dimensions: | 6 1/8”x2 3/8”x2” (156x61x51 mm) |
| Weight: | 0.55 lbs. (250 g) w/o batteries |
| Accessories: | (ATE1JC) |
| Transmitter Illustration | View Schematic Drawing & Button Details |
F25-8S Rx
( Receiver Unit)
| Power Supply: | 12-24 VDC 24/48 VAC 110/220 VAC 380 VAC (+/- 10%) |
| Power Indicator: | Indicator Light + LED (on Relay Board) |
| Internal Horn: | The Receiver has an Internal Horn Buzzer (85 dB) |
| Dimensions: | 7.87″×6.38″×4.21″ (200x162x107 mm) |
| Weight: | 3.42 lbs (1550 gr) w/o Cables |
| Wiring Diagram: | View Wiring Diagram (pdf) |
| Mounting: | View Mounting Diagram (pdf) |
