F21-E2 PLL
F21-E2 TR (1Tx+1Rx)
Four-Motion (8 Single-Step Command Buttons)
Single-Speed Remote Controller
One Transmitter + One Receiver
F21-E2 2TR (2Tx+1Rx)
Four-Motion (8 Single-Step Command Buttons)
Single-Speed Remote Controller
Two Transmitters + One Receiver
F21-E2 General Specification
| RF Unit: | Microprocessor-controlled PLL synthesizer (160 Channels/Frequencies) |
| Channel Spacing: | 80 KHz |
| RF Power: | FCC Part 15 (50mV/meter field strength) / <10 mWatt |
| RF Approval: | License-free in North America |
| Modulation: | FSK |
| Installation: | Pre-wiring cable for quick and easy installation |
| Housing: | Durable casing with extra shock resistance (IP65) |
| Temperature Range: | -49°F to 185°F (-40°C to +85°C) |
| Operation Range: | Up to 110 yards (100 meters) |
| FCC: | LWN1211FE2 |
| Ingress Protection: | IP65 |
| Special Characteristic: | e-Card interface – plug and play |
Application:
F21-E2 Tx (Transmitter)
| Power Supply: | 2 AA-Sized Batteries 2 x 1.5 Volts Or 2x AA-Sized rechargeable |
| Power Indicator: | 3-Stage LED |
| Dimensions: | 5.2”x 2.17”x 1.54” (132 x 55 x 40 mm) |
| Weight: | 0.39 lbs. (175 g) w/o batteries |
| Accessories: | (ATE2PC) |
| Transmitter e-card Illustration | View Tx e-card Location |
| Special Feature: | Transmitter can be used as an e-card copier for pairing purposes |
F21-E2 Rx
( Receiver Unit)
| Power Supply: | 12-24 VDC 24 VAC / 48VAC 110/220 VAC 380 VAC |
| Power Indicator: | LED (on Relay Board) |
| Dimensions: | 7.50″×3.35″×2.44″ (190 x 85 x 62 mm) |
| Weight: | 2.1 lbs (950 gr) w/o Cables |
| Wiring Diagram: | View Wiring Diagram |
| Mounting: | View Mounting Diagram (pdf) |
| Rx Antenna: | Internal – fixed on Relay Board |
| Rx e-card: | Identical to Tx e-card Interchangeable |
